Maytag CANYON C310 Uživatelský manuál

INSTALLATION AND OPERATION MANUAL WARNINGS• Hot! Do not touch! The glass and surfaces of this appliance will be hot during operation and wil

10NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.oPeraTing hinTs1. Burn only dry, well-seasoned wood for maxi-mum heat output. In some states it

11NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.3. Place a small amount of crumpled paper in front of the firebox and cover it with a fe

12NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.Keeping freshly loaded wood away from the window will also help. Load fresh logs in the rear of

13NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.4. Operate your stove as much as possible in the low to medium burn ranges.5. Do not lower t

14NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.Experiment with different loading configurations to achieve longer burns. Try loading the wood fr

15NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.TrouBleshooTingProblem SolutionPOOR DRAFT: Extend chimney in length or have the chimney real

16Do’s anD Don’TsDO NOT: Install or operate this stove before reading this manual. DO NOT: Close the draft beyond the point at which the flames a

2NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.ContentsTesTing informaTion ...

3NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.TesTing informaTionThis manual describes the installation and operation of the Canyon™ C310 non-c

4NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.DrafTingYour wood stove is dependent upon a properly functioning chimney for optimum performance.

5NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.Please be patient with the heat output of your stove for the first few weeks. The steel will go th

6NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.Brick insTallaTioncanyon™ c310 Brick insTallaTionCAUTION: Wear gloves during brick installation

7NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.Required ClearancesWARNING: BE ABSOLUTELY SURE THE DISTANCE BE-TWEEN THE HEATER AND THE

8NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.chimney requiremenTsThe Canyon™ C310 inserts are approved for use in masonry fireplaces built to U

9NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.inserT Pre-insTallaTion PreParaTion Install the two 3” (76mm) long bolts (with the head up) t