Maytag RJRS4282A Specifikace Strana 15

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 21
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 14
Decorator Panel Specifications for Overlay Models (See illustration on page 14.)
Important: Because of continuing product improvements, Jade
reserves the right to change specifications without notice.
Dimensional specifications are provided for planning purposes
only. For complete details, see installation instructions packed
with product before selecting cabinetry, making cutouts or
beginning installation.
INSTALLATION GUIDE – OVERLAY MODELS
Backer Panel Thickness
1
/4" (0.64 cm)
Spacer Panel Thickness 0.100" (0.25 cm)
If Raised Panel is Used Overall Front Panel
Thickness Not to Exceed 1
1
/4" (3.18 cm)
NOTES:
1. Use countersink screws for attaching the
backer panel to the front panel.
2. On 42" custom panels, watch location of
handle mounting due to undercut of front
panel.
3. For freezer dispenser front panels, remove
fountain trim and tape it to the backside
of the backer panel. Note: Recycle symbol
should be visible and located at the bottom.
4. You may want to remove any additional
material on the backer panel when used in
conjunction with a front panel. Remove
1
/32"
of thickness and
1
/2" of width on the inside
surface of the backer panel. This will help
ease assembly of the panel assembly onto
the door.
Overlay Models
The decorator panels for overlay models cover the door trim for an attractive, seamless look that flows into the overall design of the
room. This application is often accomplished by using three panels: the decorative front panel, a spacer panel of .10" (2.5 mm) thickness,
and a
1
4" (0.6 cm) backer panel. Other options to achieve this look (such as using one panel routed for different dimensions) may be
available from your cabinet manufacturer.
Jade offers 42" and 48" dispenser and nondispenser models with the overlay design.
42"-Wide Cabinet 48"-Wide Cabinet
BACKER PANEL in. cm in. cm
(A) Grille Panel
W Width 40
1
/4 102.24 46
1
/4 117.48
H Height 8
3
/4 22.23 8
3
/4 22.23
(B) Freezer Dispenser Panel
W Width 16
1
/4 41.28 18
1
/2 46.99
W1 Width 2 5.08 2 5.08
W2 Width 14
1
/2 36.83 14
1
/2 36.83
H Height 69
1
/8 175.58 69
1
/8 175.58
H1 Height 34
1
/16 86.52 34
1
/16 86.52
H2 Height 48
1
/8 122.24 48
1
/8 122.24
(C) Freezer Nondispenser Panel
W Width 16
1
/4 41.28 18
1
/2 46.99
H Height 69
1
/8 175.58 69
1
/8 175.58
(D) Refrigerator Panel
W Width 23
1
/2 59.69 27
1
/4 69.22
H Height 69
1
/8 175.58 69
1
/8 175.58
SPACER PANEL in. cm in. cm
(A) Grille Panel
W Width 39
1
/4 99.70 45
1
/4 114.94
H Height 7
3
/4 19.69 7
3
/4 19.69
(B) Freezer Dispenser Panel
W Width 15
1
/4 38.74 17
1
/2 44.45
W1 Width 2 5.08 2 5.08
W2 Width 14
1
/2 36.83 14
1
/2 36.83
H Height 68
1
/8 173.04 68
1
/8 173.04
H1 Height 34
1
/16 86.52 34
1
/16 86.52
H2 Height 48
1
/8 122.24 48
1
/8 122.24
(C) Freezer Nondispenser Panel
W Width 15
1
/4 38.74 17
1
/2 44.45
H Height 68
1
/8 173.04 68
1
/8 173.04
(D) Refrigerator Panel
W Width 22
1
/2 57.15 26
1
/4 66.68
H Height 68
1
/8 173.04 68
1
/8 173.04
FRONT DECORATOR PANEL in. cm in. cm
(A) Grille Panel
W Width 40
1
/4 102.24 46
1
/4 117.48
H Height 8
3
/4 22.23 8
3
/4 22.23
(B) Freezer Dispenser Panel
W Width 16
7
/16 41.75 18
3
/4 47.63
W1 Width 2
1
/4 5.72 2
1
/4 5.72
W2 Width 14
1
/4 36.20 14
1
/4 36.20
H Height 69
1
/4 175.90 69
1
/4 175.90
H1 Height 34
5
/16 87.15 34
5
/16 87.15
H2 Height 47
13
/16 121.44 47
13
/16 121.44
(C) Freezer Nondispenser Panel
W Width 16
7
/16 41.75 18
3
/4 47.63
H Height 69
1
/4 175.90 69
1
/4 175.90
(D) Refrigerator Panel
W Width 23
3
/4 60.33 27
1
/2 69.85
H Height 69
1
/4 175.90 69
1
/4 175.90
13
Zobrazit stránku 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

Komentáře k této Příručce

Žádné komentáře